0 Item

Shopping cart(0)

There are no more items in your cart
Included taxes €0.00
Total (tax incl.) €0.00

Category: Divesoft – Accessories

#htmlcaption1 #htmlcaption2 #htmlcaption3
Filter (21 products)

Price

€0.00 - €150.00

Prices drop

create quotation from my cart Request a quote
€36.81

Power adapter with plug-ins for the EU,UK and USA. 

In stock

Spare kit of O-rings for DIVESOFT He/O2 Analyzer and jumper for firmware upgrade

In stock
€10.50

Bleed valve consists of bleed valve body, bleed valve screw, o-ring 4x2 NBR70 and stainless steel ball 1/8".

 

Last items in stock

Bleed valve screw for Divesoft flow limiters.

In stock

Connection hose for use with professional, standard or inflator flow limiters.

It is meant for the cylinder low-pressure connection with the diameter of 5.8 mm..

Last items in stock

Professional flow limiter equipped with an automatic reduction valve.

This enables the extraction of gas from the tank at a constant flow rate, independent of the pressure in the cylinder.

Last items in stock

The standard limiter works on the principle of a throttle nozzle. Its flow is therefore dependent on the tank pressure. T

he greater the pressure, the greater the flow is. Therefore, it is suitable for divers to check the mixture before the actual dive. 

The flow limiter with connection to the DIN - G 5/8" for 200 and 300 bars, with needle valve. The connection hose is not included. 

Gas flow depends on the inlet pressure. 

In stock

Divesoft Standard to Professional upgrade for flow limiter

In stock

Ohm-meter plug-in.

For example: bulbs check, cables check.

After connection to the He/O2 analyzer the measuring of impedance in range of 0 — 1000 ohms is automaticaly switched on. 

There is an option to have an acustic signal when the impedance goes under 200 ohms. 

With this product we recommend to order measuring cabels #1058.

In stock

Programming plug for easy uploading of new firmware.

In stock

Voltmeter plug-in for example: battery check (lights, scooters...). 

After connecting to the He/O2 Analyzer it automatically switches itself into measuring mode. 

It measures the varying tension up to 28 V (RMS) and the constant tension up to 40 V with polarity indication. 

We recommend you to order measuring cord #1058..

In stock
€8.29

Simple connector to the DIN G5/8 valve. The connection is placed into the gas input port of the analyzer and pushed against the tank valve.

Gas flow is regulated using the tank valve. It is suitable for a fast analysis of gas in several tanks. With some valves is may be difficult or even impossible to set a low enough gas flow – in such case use a flow limiter or regulator.

In stock